Conference Papers

-Mujica M.,2019, Design of Selective Lines for Security Filters in Airports and Multimodal Facilities, In Proc. of Multilog’19, Huatulco Mexico

-Scala, P., Mujica Mota, M.,Delahaye, D., Ma, Ji., 2019, “A Generic Framework for Modelling Airport Operations at a Macroscopic Level”, in Proc. of Winter Simulation Conference 2019, Maryland, US

-Mujica Mota,M.,Di Bernardi A., Scala, P., Delahaye D., 2019, “Methodology for analysing Multi-Airport System Capacity: SBPL-MMMX System Case”, in Proc. of RIDITA’19, Covilha, Portugal

-Mujica Mota, M., Scala, P., Spit, D., Tasdelen, R.,2019, “Modelling the Ground Connection Between Two Airports in a Multi-Airport System: Case Santa Lucia – Mexico City, in Proc. of EMSS’19, Lisbon, Portugal

-Mujica Mota, M., Makhloufi A., Romero, R., 2019, “From Full Freighters to Belly Cargo Aircraft: Stochastic Analysis of Alternatives for Freight in Schiphol Airport”, in Proc. of ISPA 2019, Hong Kong, China

-Romero-Silva, R., Mujica Mota, M., 2019, “Modelling landside logistic operations of a Megahub airport with discrete-event simulation”, in Proc. of EUROSIM’19, Logrono, Spain.

-Romero-Silva, R., Mujica Mota, M., 2019, “Improving Landside operations of an Air Cargo Terminal”, in Proc. of World Conference on Transport Research, May, 2019, Mumbai, India

-Scala, P., Mujica, M., Wu , R., Delahaye, D., 2018. “SIM-OPT in the Loop: Algorithmic Framework for Solving Airport Capacity Problems”, In Proc. of Winter Simulation Conference, Gothenburg, Sweden, December 2018

-Shaaban, S., Romero-Silva R., Mujica Mota, M., 2018, “Performance of Unreliable merging lines with uneven buffer capacity allocation”, in Proc. of CIO’18, July, Girona, Spain.

– Mujica, Makhloufi, 2018, “Modelling and Improvement of Cocoa Supply Chain in Cote D’Ivoire”,Multilog’18, Puerto Escondido, Mexico

-Mujica, Romero, 2018, “Modelling, specification, simulation and performance improvement of Cargo in an Airport Hub”, Multilog’18, Puerto Escondido, Mexico

-Mujica Mota, M., Romero R., 2018,”Analysing the Decision-Rules for a Ground Delay Program: Mexican Airport Network”, In Proc. of Conf of Research in Air Transport 2018, Castelldefels, Spain

-Mujica Mota, Makhloufi, A., DeBock, N., Scala P, 2018, “MORE THAN JUST CHOCOLATE: Supply Chain Model of Production of Cocoa Crops in CÔTE D’IVOIRE”, Best Paper Award in EMSS’18, Budapest, Hungary

– Mujica Mota, Makhloufi, A., Romero, R., 2018,”From Full Freighters to Belly Cargo Aircraft: Stochastic Analysis of Alternatives for Freight at Schiphol Airport”, in Proc. Air Transport Research Society Conference, Seoul, South Korea

– Ma, J., Delahaye, D., Sbihi,M,Scala P., Mujica Mota, M, 2017 “A Study of Tradeoffs in Airport Coordinated Surface Operations”, In Proc. of EIWAC 2017, Tokyo, Japan.
– Wellens A., Mujica Mota, M., 2017, “MODELLING APPROACH FOR MANAGING THE DEMAND IN CONGESTED AIRPORT NETWORKS: THE CASE OF MEXICO CITY AIRPORT”, Case Study in Winter Simulation Conference, Las Vegas, USA
– Scala P., Mujica Mota, M., Delahaye, D., 2017, “DOWN TO EARTH SOLUTION: APPLYING A ROBUST SIM-OPT APPROACH TO RESOLVE AVIATION PROBLEMS”, in Proc. Of Winter Simulation Conference, Las Vegas, USA
– Scala P., Mujica Mota, Delahaye, D., 2017, “Using optimization and simulation to improve the quality of the solution for the airport conflict detection and resolution problem”, Poster in Sesar Innovation Days, Belgrade, Serbia
– Mujica Mota, M., Scala P., 2017,” MODEL-BASED REMOTE RUNWAY SOLUTION FOR A CONGESTED AIRPORT: MEXICO CITY AIRPORT CASE STUDY”, in Proc. Of EMSS 2017, Barcelona, Spain.
– Wellens, A., Mujica Mota M., 2017, “SIMULATION OF THE MEXICAN AIRPORT NETWORK FOR ADDRESSING A GROUND DELAY PROGRAM”, in Proc. Of EMSS 2017, Barcelona, Spain
– Mujica Mota M., Makhloufi A, Gonzales H., P, 2017, “DOWNSIZING THE AIR FREIGHTER: SIMULATION-BASED STUDY OF KLM CARGO IN SCHIPHOL AIRPORT”, in Proc. Of EMSS 2017, Barcelona, Spain
– Mujica Mota M., Makhloufi A., Boosten, G., Van Damme, D., Hunt, E., 2017, “IS YOUR BELLY EMPTY?: THE ANALYSIS OF THE TRANSITION FROM FULL FREIGHTERS TO BELLY CARGO OF KLM”, In Proc. of ATRS 2017, Antwerp, Belgium
– Scala P., Mujica Mota, M., December 2016, “OPTIMIZATION AND SIMULATION BASED APPROACH FOR AN ARRIVAL AND DEPARTURE MANAGER TOOL”, Poster presentation in WINTERSIM 2016, Washington DC., USA
– Mujica Mota, M, Scala P., De Bock, N., December 2016, “RAISING THE DYNAMICS: SIMULATION-BASED PERFORMANCE ANALYSIS FOR LELYSTAD AIRPORT”, Case Study in WINTERSIM 2016, Washington DC.USA

– Scala, P., Mujica, M., Delahaye, D., September 2016, “Implementation of an Optimization and Simulation based approach for detecting and resolving conflicts at airports”, in Proc. Of EUROSIM 2016, Oulu, Finland.
– Mujica, M., Zuniga, C., Bosten G., September 2016, “Make Space!: Simulating the A380 Operations in Mexico City Airport, Model-based disruption analysis”, in Proc. Of EUROSIM 2016, Oulu, Finland.
– Mujica, M., Zuniga, C., Boosten, G., June 2016, “MODEL-BASED CAPACITY ANALYSIS OF INTRODUCING A380 IN MEXICO CITY AIRPORT”, in Proc. Of International Conference on OR for Development, Mexico City, Mexico
– Mujica, M., Zuniga, C., Scala, P., Boosten, G., June 2016, “IMPACT ANALYSIS OF REGULAR OPS OF A380 IN MEXICO CITY AIRPORT”, in Proc. of ATRS, Rhodes, Greece.
– Scala, P., Mujica, M., Delahaye, D., September 2016,”No more Conflicts: The development of a generic airport model in a sequence-optimization framework”, in the Proc. Of EMSS 2016, Cyprus.
– Mujica, M., Scala, P., Delahaye, D.,2015, “Methodology for Assessing and Optimizing Operation Performance in Airport Systems”, in Proc. of the EIWAC 2015, Tokyo, Japan.
– Mujica, M., 2015, “Flaws and Pitfalls using Simulation in the Analysis of Aviation capacity Problems”, in the Proc. of AirDEv 2015, Bangalore, India
– Mujica M., Flores I., 2015,“CPN-DES Modular Simulator For Assessing Boarding Performance of Aircraft”, Wintersim 2015, Case Study Presentation, Huntington Beach, Ca, USA.
– October 2015, “Model-based Evaluation of B-787 disruption in the performance of a low-cost airport” in the Proc. of RIDITA conference, Barcelona, Spain.
– July 2015,“Simulation-based Turnaround Evaluation for Lelystad Airport”, In Proc. of ATRS 2015, Singapore
– Sept 2015, “Modular Approach for Modelling an Airport System”, In Proc. of EMMS’15, Bergeggi, Italy. best Student Paper award
– Sept 2015, “Urban Transport Infrastructure: A Survey”, In Proc. of EMSS’15, Bergeggi, Italy
– July 2015, “Assessing the future TMA Capacity of Lelystad Airport using Simulation”, in Proc. of ATOS, Delft, The Netherlands.
– July 2015, “”Simulating Airport Capacity: Mexico City Airport Case”, In Proc. of ATOS, Delft, The Netherlands, best student paper Award.
– Zuniga C.A., Olivares-Benitez E., Tenahua A.M., Mujica M.A., May, 2015. “A methodology to solve the Order Batching Problem”. In Proc. of the International IFAC Symposium on Information Control in Manufacturing (INCOM 2015), 48-3 PP. 1380-1386. Ottawa, Canada, ISSN 1474-6670.
– Nov, 2014, “The new definition of Capacity”, Poster Session in the SESAR Innovation Days, Madrid, Spain
– Nov, 2014, “Airport Slots and Slot Allocation: Driver for Mismatch between Airline Network and City Needs?”, in the Proc. of INAIR’14, Prague, Czech Republic.
– Oct, 2014, “Extended Definition of Capacity in Airport Systems”, in the Proc. of ISNGI’14, Vienna, Austria.
– Oct,2014, “Optimizing TMA Capacity: Case Mexico City Airport” in the Proc. of CLAIO XVII, Monterrey, Mexico
– Sept. 2014, “CPN-Simulation Methodology for the Boarding Process of Aircraft”, in the Proc. of EMSS’14, Bordeaux, France.
– July, 2014, “An Evolutionary Algorithm for Check-In Desk Allocation“ in the Proc. of IFORS 2014, Barcelona, Spain.
– Feb,2014, “Simulation-based Capacity Analysis for a Future Airport”, in the Proc. of APCASE 2014, Bali, Indonesia.
– Nov. 2013, “Assessing the Impact of A constrained Airport on the Capacity of an Airport Network with Simulation Techniques”, in the Proc. of INAIR 2013, Zilina, Slovakia.
– Sept. 2013, “Development and Simulation of a new Scheme for the Aircraft Cleaning Service”, in the Proc. of the EMSS’13 Simulation Symposium, Athens, Greece.
– Oct. 2013, “A methodology combining optimization and simulation for real applications of the Stochastic Aircraft Recovery Problem”, in Proc. of the EUROSIM’13 , Cardiff, U.K.
– July 2013, “A Simulation-evolutionary approach for the allocation of Check-In desks in Airport Terminals”, in the Proc. of the Air Transport and Operations Symposium, Tolouse, France.
– July 2013, “Combining Simulation and Optimization for Solving the Stochastic Aircraft Recovery Problem”, in Proc. of the Air Transport and Operations Symposium, Tolouse, France.
– June 2013, “Innovative framework for simulating industrial environments: An application in the Shoe Industry”, in Proc. of Int. Conference in Flexible Automation and Intelligent Manufacturing, Lisbon, Portugal.
– Sept. 2012,”The translation of CPN into NetLogo Environment for the Modelling of Political Issues: FUPOL Project”, in Proc. of the I3M Multiconference, Viena, Austria.
– July, 2012, “Simulating Land-Use policies with the use of CPN formalism.”, in Proc. of the SCS SummerSim’12, Genoa, Italy.
– April, 2012, “Recent Developments for the Use of Digital Simulation in Airport Performance Evaluation”, in Proc. of AIRDEV 2012, Lisbon, Portugal.
– Sept. 2011, “Coding TCPN Models into the SIMIO Simulation Environment”, in Proc. of the I3M Multiconference, Rome, Italy.
– Sept. 2011, “An Improved Time-Line Search Algorithm to Optimize Industrial Systems”, in Proc. of the I3M Multiconference, Rome, Italy.
– June, 2011, “Integrating Coloured Petri Net Models in the SIMIO Simulation Environment”, in Proc. of the SummerSIM’11, Den Haag, The Netherlands.
– Sept. 2010, “Heuristic Algorithms to Obtain Optimized Schedules of Manufacture TCPN Models”, in Proc. of the 7th EUROSIM, Prague Czech Republic.
– Sept. 2010, “Time Line Search for the State Space-based Optimization Algorithm for Timed Coloured Petri Nets”, in Proc. of the MCPL’10 IFAC congress, Coimbra, Portugal.
– July, 2010, “Hybrid Search Algorithm to Optimize Scheduling Problems for TCPN Models”, in Proc. of the SCSC Simulation Conference, Ottawa, Canada.
– Sept, 2009, “Performance Optimization of a CNC Machine Through Exploration of Timed State Space”, in Proceedings of the I3M 2009 Simulation Conference, Canary Islands, Spain.
– July, 2009, “Optimizing Systems Performance Exploring the Timed State Space of Coloured Petri Nets”, in Proc. of the EURO Conference, Bonn, Germany.
– June, 2009, “A Two Step Algorithm to Improve Systems Optimization based on the State Space Exploration for Timed Coloured Petri Nets”, in Proceedings of the TiSto 2009, Paris, France.
– Sept, 2008, “Optimizing Time Performance in Reachability Tree-based Simulation”, in Proc. of the International Mediterranean Modelling Conference, Campora Sant Giovanni, Italy.
– Oct, 2007, “Data Management to Improve CPN Simulation Performance”, in Proceeding of the International Mediterranean Modelling Conference, Briatico, Italy.
– Sept, 2007, “Improvements for a Coloured Petri Net Simulator”, in Proceedings of the EUROSIM, Ljubljana, Slovenia.
– June, 2007,“Improving CPN Model Simulations by Intelligent Evaluation Techniques”, in the Proc. of INFORMS, San Juan, Puerto Rico.
– Sept, 2006, “Building an Efficient Coloured Petri Net Simulator”, in Proceedings of the International Mediterranean Modelling Conference, Barcelona Spain